Online Shop

Swordfish Pro plus 200amp 8s Data logger

Hifei Swordfish Pro+ 200 amp water cooled esc. The "+" means that this esc comes with a built in data logger to measure Current, Voltage, Motor RPM, Temperature and Throttle Travel. This is a high quality ESC designed specifically for racing boat. Programming can be done with your transmitter, optional program card or optional USB adapter (Requires Windows xp or newer PC) or optional LCD Program Box/Handheld Unit.

Product details

200 Amps, 4s to 8s LiPo Cells.

-Microprocessor Controlled
-Aluminum PCB Technology
-The Most Advanced Automotive Level High Power MOSFETs
-Integrated the double water cooler, Anti splash water
-High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
-Programmable low voltage cutoff
-Programmable cutoff types(soft cutoff/hard cutoff)
-Time advance programmable (auto/low/middle/high,0~30 degree optional)
-Programmable startup type(very soft start/soft start/fast start)
-Thermal Protection(100 centigrade)
-Runs motor in forward or reverse by swapping any two motor wire connections.
-Safe 'power on' arming program ensures motor will not accidentally turn on.
-Auto shut down when signal is lost or radio interference becomes severe for more than 0.1 seconds . After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
-The ESC is disabled when the voltage is over 35v at power-on

Input Voltage: 4S-8S Lipo Cells
Continuous Current(Surge): 200A (240A)
NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit. Programmability: Transmitter, HiFei ProgramBox, HiFei USB Linker, HiFei ProgCard
Data Logger: No
Program Setting Software: HiFei Software 4.0X
Dimension: 104x41x22mm (not including wires)
Weight: 164g

Built in Data Logger.

Requires Windows xp or newer PC and optional USB programmer.