Product details
Hifei Swordfish Pro+ 220 amp water cooled esc. The "+" means that this esc comes with a built in data logger to measure Current, Voltage, Motor RPM, Temprature and Throttle Travel. Programing can be done with your transmitter, optional program card, optional USB adapter (Requires Windows xp or newer PC)or optional LCD Program Box/Handheld Unit.
-Microprocessor Controlled
-Alumimium PCB Technology
-The Most Advanced Automotive Level High Power MOSFETs
-Built-In Data Logger (record critical parameters: Current/Voltage/Motor RPM/Temperature/Throttle Travel), requires options USB programmer.
-Integrated the double water cooler, Anti splash water
-High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
-Programmable low voltage cut-off
-Programmable cut-off types(soft cut-off/hard cut-off)
-Time advance programmable (auto/low/middle/high,0~30 degree optional)
-Programmable start-up type(very soft start/soft start/fast start)
-Thermal Protection(100 centigrade)
-Runs motor in forward or reverse by swapping any two motor wire connections.
-Safe 'power on' arming program ensures motor will not accidentally turn on.
-Auto shut down when signal is lost or radio interference becomes severe for more than 0.1 seconds .After radio connection has been re-established, moving the throttle to the lowest position can restart the motor.
-The ESC is disabled when the voltage is over 26v at power-on
Specs:
Input Voltage : 2S-6S Lipo Cells
Continuous Current(Surge) : 220A (250A)
BEC Switching ; BEC Max 4A
Programmability : HiFei program Box, HiFei USB Linker & Data Logger (requires Windows xp or newer pc), HiFei Prog Card.
Dimension : 104x41x22mm
Weight : 164g
NOTE: USB programmer requires Windows XP, Vista or 7(will not work with windows 8).
220 Amps, 2s to 6s LiPo cells.
Built in Data Logger. Requires Windows xp or newer PC and optional USB programmer.
Built in BEC(Battery eliminator circuit).