Online Shop

HP-EOS Sentry3

EOS Sentry3 2~8S Battery Checker & Balancer, with Store Mode Discharge

Product details

The Latest 2016 Model Hyperion Sentry 3 Battery Balancer, Checker, and Discharger
Product Description

The EOS Sentry3 is a quick, clever, and convenient device for analyzing your batteries. The Sentry3 shows at a glance the remaining capacity in your battery pack, cell balance, cell voltages and gap. Stand-alone Balance and Store Modes at industry-leading discharge performance. Sentry 3 provides the information and tools you need to maintain top performance and reliability from your batteries, and to avoid costly mistakes.

2S ~ 8S Battery compatible with HvLi LiPo, Standard LiPo, LiFe. NiCd, and NiMh capable
EOS Sentry 3 displays the total battery pack voltage and a percentage bar graph for estimated remaining capacity
View screens for Minimum and Maximum cell voltages, and max cell Gap
Store Mode allows you to discharge your battery to 3.8V (Discharge rate is a powerful 150mah)
Balance Mode tunes your pack for performance automatically
5 ~ 25V auxiliary input voltage check port using JST 2-pin connectors on pack side
Large clear display and easy-to-use menu
Powered from the battery pack you connect for testing. No batteries needed for device.
Store Mode: Allows you to discharge your HvLi, LiPo, LiFe to 3.8V for storage. Discharge rate for Store mode is 150mah and will cutoff to 3.8V.

Balance Mode: Will automatically discharge the individual lithium-based cells such that they are closely balanced, if balance can be obtained while all cells remain at or above 3.8V.

?This battery checker is compatible with JST-XH balance adapter when you use directly otherwise require each type of balance board adapter.
In order to use Sentry 3 with the legacy Hyperion G3 packs with Hyperion-style balance connector, connect the battery Sentry 3 via HP-EOSLBA-26CBL cable + HP-EOSLBA-26HP-B multi-adapter board or HP-EOSLBA-7UCBL cable + HP-EOSLBA-7U-B multi-adapter board. These cable&adapter sets are included with Hyperion 6S and 7S chargers. Hyperion G3 packs produced after mid-2014 and all Hyperion G6 HvLi packs use XH balaance connectors and need no adapters to the Sentry 3.
NiMh can be checked between 5V~25V using JST connector