Product details
1)Microprocessor controlled
2)Extremely low resistance
3)200A continous(230A surge)
4)Up to 38cells NiMH/NiCad or 4-12 cell Lithium-polymer
5)High rate adjustable switching (PWM:12KHz/18KHz/24KHz)
6)BEC:None
7)Programmable low voltage cutoff
8)Programmable cutoff types(soft cutoff/hard cutoff)
9)Programmable brake type(disable/soft brake/hard brake)
10)Time advance programmable (low/standard/high)
11)Programmable current limiting(very ensitive/standard/insensitive/disable)
12)Governor mode(low rpm governor/high rpm governor)
13)Programmable Constant Power startup type(very soft start/soft start/fast start)
14)Thermal Protection(100 centigrade)
15)Apply to most of inrunner and outrunner brushless motors.
16)No complex programming, auto adapt work mode.
17)A LED (flashes) indicates current limiting or temperature protect is actived.
18)Runs motor in forward or reverse by swapping any two motor wire connections.
19)Safe “power on” arming program ensures motor will not accidentally turn on.
20)Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
21)The ESC is disabled when the voltage is over 51V at power-on.
Dimension: 125mm X 60mm X 38mm
Weight: 294g (incl wires)