Online Shop

Swordfish Pro 300 amp Lite version - 15s lipo ESC with data logging

$430.00
( $50 ) required to place the item in backorder
A Deposit is required to hold any out of stock items until we contact you to arrange viewing or purchasing.
Hifei Swordfish 300 Esc with Data Logging. At a maximum of 300 amps and 60 volts, this is the most powerful esc that Hifei has ever produced. Able to provide power upto a 30 Horse Power Electric Motor!!! And with the new data logging feature, you will be able to take the guess work out of prop, motor or strut changes by logging the following info, Current/Amps, Voltage, Temperature, RPM, Power & Throttle travel. - Shrink wrapped and conformal epoxy coated for resistance to water. If you want a fully waterproof esc, please select Swordfish part number hef-HBF1300L. Includes a unique aluminum PCB processor board which incorporates watercooling to keep the ESC cool during the entire race. With an extremely low resistance (0.0006 ohm) and up to 8 optional program settings to tailor the esc to your needs.

Product details

1) Microprocessor controlled
2) Extremely low resistance
3) 300A continuous (380A surge)
4) Up to 48cells NiMH/NiCad or 4~15 cell Lithium-polymer
5) PWM rate: 8KHz
6) BEC: no (Optical Coupling)
7) Programmable low voltage cutoff
8) Programmable cutoff types(soft cutoff/hard cutoff)
9) Programmable brake type(disable/soft brake/hard brake)
10) Time advance programmable (low/standard/high)
11) Programs using program Box (Optional) or the included USB Linker (Hifei software V4.01/V4.02)
12) Firmware Upgradeable
13) Programmable startup type(very soft start/soft start/fast start)
14) Thermal Protection(100 centigrade)
15) Runs motor in forward or reverse by swapping any two motor wire connections.
16) Safe “power on” arming program ensures motor will not accidentally turn on.
17) Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
18) The ESC is disabled when the voltage is over 63v at power-on.
19) Data Logging Feature Includes, Current, Voltage, Temperature, RPM, Power & Throttle travel (These features require downloading/installing the software and you to supply a windows pc.
20) Including one anti-spark wire and USB Linker

** We strongly recommend to use HiFei Capacitance Pool when the LiPo cell number is more then 10S.

Specs:
Size: 120 x 73 x 25mm (4.72'x 2.87' x 0.98')
Weight: 300g (Water Resistant)
Notes:
Built in Data Logger. Inlcudes USB Programmer but Requires computer with Windows XP, Vista or 7(will not work with windows 8).
NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit.